CGEO-D3001-Dynamic Datalogger

Product Detail

Description

CGEO-D3001 Dynamic Datalogger is a vibration signal collection board that supports wired network communication. Each board has 8 channels, each channel can be connected to an analog voltage output type sensor. The board supports LAN wired transmission and 9~36VDC power supply. Each channel uses an independent 24-bit ADC with a high signal-to-noise ratio, and various synchronization methods ensure high-precision synchronous acquisition. Even when multiple instruments are cascaded, synchronization can be maintained.

Applications

Landslides

Slope sites

Tailings lagoons

Aquifers

Dams

Embankments

Operation

CGEO-D3001 Dynamic Datalogger is mainly developed for monitoring projects. According to the channels required by the user, the corresponding outdoor collection box can be selected for the monitoring project. The collection box can be equipped with a 4G router to upload data to the cloud server in real-time via the 4G network. The data protocol of the datalogger is open to external interfaces and can be connected to the user's monitoring platform for real-time monitoring.

Features

Support wired network port communication

High signal-to-noise ratio

High precision synchronized acquisition

Real-time monitoring

Specifications

Model	CGEO-D3001
Single Module Channels	8 channels
Signal Type	Analog Voltage
Signal Form	Single-ended, input impedance 1MΩ
Voltage Range	±10V
Input Noise	5μVrms
Dynamic Range	≥120dB
Sampling Method	Each channel independent ADC parallel synchronous acquisition
Bit Depth	24 bits
Sampling Rate	Up to 1000Hz/channel, multiple options available
Built-in Programmable Amplification	1/2/4/8/16/32/64/128/256/512
Lower Frequency Limit	The voltage input is DC.
Number of system support devices	No less than 15 units (depending on sampling rate)
Communication Interface	RJ45 network port; multiple devices can be expanded through switch cascade
Lightning Protection Module	Supports network port protection
Server Data Upload	Support to transmit data to a single specified transmission server
Notch Filter	50Hz and 100Hz two frequency point notch wave
Power Supply	Use 12V DC adapter; support 9~36VDC
Power Consumption	3W
Operating Temperature	-20°C ~ 80°C
Dimensions	170mm x 133mm x 33mm (8 channels)